Sterile, single use surgical gowns in cartons of 20
The COMPRO Surgical Gowns are available in both Standard and Reinforced depending on the level of protective barrier required in the operating environment and the surgical procedure involved.
The Reinforced gown has higher level of protection against fluid strike through. It is achieved by reinforcing the Standard gown at critical areas of the gown with another fabric.
ARTG inclusion number: refer regulatory file
GMDN: refer regulatory file
The Standard gown fabric is made from Dupont’s SOFTESSE® fabric, which is a blend of 55% woodpulp and 45% Dacron® polyester. Weight of fabric is 67.8g/m2. The SOFTESSE® fabric is water repellent. The colour of the gown is blue.
The Reinforced gown is also made from the same fabric. The inside of the gown is reinforced with a 47gsm PE breathable composite film. The reinforcement is at critical areas of the gown, i.e. the inside of the sleeves and the inside front of the gown, refer sketch below.
The seams along the sleeves of the gown are glued, not stitched. This construction confers upon the gown added protection against strikethrough because of the absence of holes from stitching process
Each unit pack of the gown consists of 1 gown and 2 nonwoven hand towels
Shelf life is 5 years from month of manufacture.